Photoelectric Smoke Alarm w-Visual Signaling Appliance- Wall Mount by Gentex

"Designed to give reliable early warnings"

View Larger Image

Product Features

Available in 120VAC
177 candela rating (UL 1971 listed)
Horn frequency 3100Hz (nominal)
Hardwired
Nominal 2.5% sensitivity

PLACE YOUR ORDER

Item#: 713902
List Price: ~~$161.00~~
You Save: $16.25 (10%)
Your Price : $144.75

(Read Terms)

Availability:
Temporarily out of stock - Order Now

Safe & Easy Shopping

The photoelectric single/multiple-station smoke alarms are designed to give reliable early warning of the presence of smoke where both audible and visual alarms are required. The series features a 90dBA solid-state piezo signal and a 177 Candela strobe with "FIRE" lettering. The strobe is listed per UL 1971. The smoke alarm operates on the light scattering principle, a superior method of detection in smoldering fires, utilizing a pulsing LED light source and a photodiode sensor in a fully screened sensing chamber. Every 4 to 5 seconds, the pulsing LED emits an infrared beam that bypasses the photodiode under normal conditions. However, when smoke enters the sensing chamber, the infrared beam is deflected onto the sensor by the smoke particles. The LED pulse rate increases to 8 times the normal rate, and after the photodiode confirms that smoke is present for 2 consecutive pulses, it will produce the signal necessary to trip an alarm. Upon activation, the alarm will emit a 90dBA local audible signal and activate the high-intensity strobe. During the alarm period, the strobe will flash at a brightness of 177 candelas 60 times per minute. After the smoke has cleared from the detector, the unit will revert to the normal standby condition

Standard Features:
— Quick-Disconnect Wiring Harness (CS Models)
— Form C Auxiliary Relay Contacts for Remote Annunciation (CS Models)
— 9VDC Battery Back-Up (7109/7139CS/LS) w/Audible Low Battery Chirp
— 120VAC with 9VDC Battery Back-up Models, Visual Does Not Operate on Battery Back-Up
— Relays Operate on Battery Back-Up
— Relay Contacts Will Activate From the Tandem Wire
— 90dBA Continuous Piezo Horn (710CS/LS & 7109CS/LS Series)
— 90dBA Temporal 3 Evacuation Piezo Horn (713CS/LS & 7139CS/LS Series)
— 5-to-1 Signal-to-Noise Ratio
— Fully Insect Screened
— Interconnect with all Gentex tandem capable smoke alarms
— Interconnect up to 6 Alarms (CS Models)
— Easy Wash on-site maintenance washing program
— 9 Foot Line Cord (LS Models)
— Mounting Hardware Adapts to Standard Junction

Related Products

Category: Carbon Monoxide and Smoke Detectors

Customers who bought this product also bought

Nutone Strobe Door Chime
Additional Doorbell Transmitter for Alertmaster Series
AlertMaster AL10-AL12 Combo with Door Knocker
ILY Alarm Clock with ILY Bedshaker
Serene Jumbo Key 55dB Amplified Phone for the Hearing Impaired

Show all products people also bought...

Product Reviews

Write a review for this product