SafeAwake Smoke Alarm Aid with Bed Shaker
"Get Vibrating, Visual & Sound Alerts of Smoke/Fire"
- Bed shaker, flashing light & low frequency, hi-dB sound
- Responds to U.S. smoke alarms produced after 1996
- Must be combined with approved smoke alarm
- Simply plugs into outlet (No hard-wiring needed); battery back-up in case of power loss
- Can use with smoke detector that is ul 217 approved with t3 pattern
The SafeAwake instantly wakes you from deep sleep to alert you to smoke and fire. It works with your own smoke alarm system, triggering all your senses with a motorized bed shaker, a flashing light, and a low frequency, high decibel square wave sound you can actually hear.
The Problem: Smoke alarms in the United States use high-frequency, high decibel sound notifications to warn people of fire emergencies. As people grow older they lose their high-frequency hearing. 1 in 3 people over the age of 65 years, and 1 in 2 people over the age of 75 years have difficulty hearing or cannot hear this high-frequency alarm. Of course, these same challenges are faced every day by deaf and hearing impaired individuals.
The Solution: SafeAwake's smoke alarm aid listens for the smoke alarm emergency sound signal. It then provides a loud, low-frequency square wave sound notification and sends a non-continuous signal to the bed shaker that literally pulls each and every sleeper from deep slumber and warns them of smoke and possible fire.
Modern research has made possible the SafeAwake smoke alarm aid with its patented sound reception to hear conventional smoke alarms when they activate. It comes with two of the most effective means of emergency notification: the low frequency, high decibel square wave sounder, and the non-continuous pulsated tactile stimulator to awaken a sleeping person.
The SafeAwake is designed to work in partnership with a properly installed, properly working, traditional smoke alarm. When activated, a smoke alarm sends out a T3 alarm that instantly triggers the SafeAwake.
The SafeAwake is a model of high-tech simplicity. There is a test button, an automatic shutoff and restart, a turn-on indicator light, a battery backup in the event of electrical failure; and even a system to tell if the batteries are weak.
It works anywhere. It's light, compact, portable, and simple. No other device offers the safety features and benefits of the SafeAwake. Fast and easy setup for homes, hotels, motels, hospitals, senior citizen residences, independent and assisted care facilities, in fact, everywhere that people sleep.
IMPORTANT NOTE: SafeAwake is not a fire detection system. It must be combined with an approved, properly installed, and operating smoke alarm. The SafeAwake saves sleeper's lives through an additional means of fire notification which has been proven more effective.
- Indicator light tells user device is active
- Battery backup in case of power loss
- Automatic shut-off and reset after two minutes
- Emits a high-decibel, low frequency (500Hz) audible signal
- Tactile stimulator with non-continuous signal
- Fastest sound reception on the market by 15 seconds
- Sleep more peacefully through the night assured of a fire safety notification
- Simplicity— Simply plug into any bedside outlet and sit the SafeAwake on a bedside table or hang it on the wall. (No additional hard-wiring required.) The bed shaker fits directly under the mattress.
- Universality— Responds to any U.S. domestic or commercial smoke alarm produced after 1996.
- Reliability— Equipped with a battery system that provides back up power in the event of electric power failure
- Portability— Easy to pack and small enough to fit into a travel bag
- Warranty— Comes with a two-year limited warranty
- Made in the U.S.A.